Mileage Programmer

9S12 CAS3 CAN & BDM Programmer

9S12 can program HC12, 9S12, 9S12X CPU of Motorola/Freescal.      Product Detail>> Item No. SM37

BMW CAN Programmer 2010 Version Support CAS3+

BMW CAN Programmer 2010 Version hot sale, Support new model CAS3+      Product Detail>> Item No. SM36

VW & AUDI 250 Programmer

VW & AUDI 250 Programmer is mainly used for programming CDC 32X7CPU which produced by Mircronas company.      Product Detail>> Item No. SM35

CAS BDM Programmer for Digimaster 3/ CKM100/ CKM200

CAS BDM Programmer used to read and program BMW CAS 1/2/3/3+/4, and BENZ series EIS CPU data. CAS BDM Programmer works together with Digimaster 3, CKM100 or CKM200.      Product Detail>> Item No. SM34

Magic Dash Odometer correction

Interface Magic Dash is the successor of the known device Magic Dash K-line.      Product Detail>> Item No. SM30

CLIP EEPROM SOIC-14CON for Tacho Universal (5251) 0714 NO.43

CLIP EEPROM SOIC-14CON for Tacho Universal (5251) 0714 NO.43 is the NO.43 of Tacho Pro 2008 Jan Version Tacho Universal Dash Programming Tool      Product Detail>> Item No. SF29

CLIP EEPROM DIP-8CON for Tacho Universal NO.42

CLIP EEPROM DIP-8CON for Tacho Universal NO.42 is the NO.42 of Tacho Pro 2008 Jan version.      Product Detail>> Item No. SF28

VW AUDI KM TOOL V2.5

VW AUDI KM Tool V2.5 is a KM adjust tool, it works with VW cars models such as Golf 5 Passat EOS Caddy Tiguan and Touran; works for AUDI A3 A8 R8 and TT. VW AUDI KM Tool V2.5 is multi-language options.      Product Detail>> Item No. SM29

Tacho Universal V2008.01 Update& Repair Kit Never Locking Again

Tacho Universal V2008.01 Update& Repair Kit can repair the following troubles: Screen display: Diga update and RESET, No display after powered on, No vehicle list, screen display black strip, Frequently Halting. Screen display both the following: update handheld and the machine cannot read EEPROM.      Product Detail>> Item No. SM28

Tacho Pro Plus V2008 July Version Main Unit for Sale

Tacho Pro Plus V2008 July Version Main Unit for Sale.This is the main unit of tacho pro u2008 dashboard programming tool July version.Used for those customer who's main unit has been damaged or lost.      Product Detail>> Item No. SM21-1

CAS3 Adapter for Digimaster II

CAS3 Adapter for Digimaster II      Product Detail>> Item No. SP74

Audi VW micronas and Fujitsu programmer 2.0

Audi VW micronas /Fujitsu programmer 2.0>R200+R250
Audi VW micronas/Fujitsu programmer 2.0 replace the R200 and R250 fully function      Product Detail>> Item No. SE28

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, you don't need to remove the micro from the board.You only connect 7 pins will be ok. It connect to PC by USB.      Product Detail>> Item No. SM24

DMW3 VW AUDI Code Reader and Mileager Programmer Tool

DMW3 is a new version hand-held car code reader for Audi Volkswagen cars. it supports almost all control module for Audi Volkswagen cars including the KWP1281 (K-Line), KWP2000 (K-Line), as well as KWP6000 CAN Bus) protocol. it can also change odometer, read anti-theft code, diagnose and programme keys      Product Detail>> Item No. SM22

OPEL KM TOOL

The software together with interface is designed for changing the state of kilometers in engine controllers EDC16 in OPEL cars. Everything takes place through diagnostic plug. OPEL KM TOOL software is enriched in the possibility of changing dashboard in selected models. Set contains interface in professional plug OBD which is at the same time the key for activating the program, original CD with program and controllers.      Product Detail>> Item No. SM26

Super Tacho Pro Correction Machine

SUPER TACHO ver.03/2009
For the update, we offer the update software,only for Super Tacho from our official website.
Update for free via internet.
The SUPER TACHO have everything inside what you need for bugfix and repair your dash and control device.      Product Detail>> Item No. SM20

VAG DASH PROG Handheld Full version + NEW 08 VW Update

Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; Can make correction of odometer and read immo code.
Latest 07 update available now, it can do VW dash with CDC3217/97 and 24C32 memory BY OBD !!!!!!      Product Detail>> Item No. SM18

USA prog odometer correction tool

Update 25/5/2009 VW 07-UP new version : CDC3272 dashboard for new VW and SKODA. Update 21/5/2009 Modified program of Ford E250 08-UP, F150 06-UP, F350 06-UP, F500 05-UP, Town car 05-up , Taurus 08-UP , Chrysler PT Cruiser 99-01 . Update 18/5/2009 Caravan 08-up Voyager 08-up new version...      Product Detail>> Item No. SM07

TMS370 Mileage Programmer

The tms370 is the best low cost programmer for ti tms microcontroller development, car radios and car dashboards programming.      Product Detail>> Item No. SM05

Tachpro Kit 2.0V Odometer Correction Mileage Tool

The Tacho Pro software might not work on PC`s that are faster than 233 MHZ. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell      Product Detail>> Item No. SM23